FANATEC

Sort By:  
Add magnetic shifter plates to your Fanatec Universal hub.
$25.00
Add ABS and other rumble effects to your Fanatec CSL pedals
$25.00
Fanatec shifter SQ 1.5 mounting plate for 4040 aluminium profile.
$30.00
A simple wall mount bracket designed to mount your unused steering wheels to the wall, boost your man cave appearance.
$35.00
Add a set of Tilton Pedals for your Fanatec Clubsport Pedals V2
$35.00
Used to add button box functionality to your rig (electronics not included). Require 2 for either side of your wheel base.
$55.00
This mod provide the button box functionality by adding 5 push buttons and 2 rotary encoders to one 3D printed plate
$65.00
This mod provides button box functionality to both sides of the CSL wheelbase (10 push buttons and 4 rotary encoders)
$250.00
Magnetic Paddle Shifter Mod for the Fanatec Universal Hub by Lv999Rabbit
Notes from author
Include Design Sources
Do it if you want to use it after modifying it.
However, re-deployment is prohibited.

Magnet:   Neodium : Ø10×5mm
Bolts 2 x M3 × 8~10mm 

Information has been taken directly from the Thingiverse website, there are no fixings or bolts etc included in this print.
Add magnetic shifter plates to your Fanatec Universal hub.
$25.00
Fanatec phone mount by markedagain
The author needed a mount for his Motorola phone on a fanatec CSW wheelbase. The Motorola phone fits well with the full plate version.
Notes from author;

Have included the X version but my phone slides out of it often, was able to solve the issue by attaching a few thin rubber feet on the back to make it fit snugly and not slide off when the wheelbase is shaking.

He also ended up cutting off one of the spacer on the side as the phone would not slide in.
Left it in the model files in case your phone is smaller, just cut off the tab using a knife

All picture are taken from the Thingiverse website and no fixings or screws are included with this print.
Fanatec phone mount
$25.00
Shake-it Rumble pedal mod for Fanatec CSL pedals by 3lfk1ng
This mod is based on the video posted by amstudio for a rumble motor holder for the Fanatec CSL elite pedals with load cell.

The design is based on PS4 controller's motors. All information is taken directly from the thingiverse website.
Add ABS and other rumble effects to your Fanatec CSL pedals
$25.00
Fanatec Shifter SQ 1.5 Plate
Fanatec shifter SQ 1.5 mounting plate for 4040 alu profile.
Included is also dwg file and Fusion 360.

Bolts and 4040 profile not included

All pictures are taken from Thingiverse website.
Fanatec shifter SQ 1.5 mounting plate for 4040 aluminium profile.
$30.00
Fanatec steering wheel wall mount braket/adapter by Blazze11
A simple wall mount I designed to mount your unused wheels to the wall

Notes from the author:
V1 might have some issues. (to weak, bad fit)
Added a much stronger V2.
Added V2.9 which is rotated by 90°.
Bracket hole distance of V2 is 72mm
A simple wall mount bracket designed to mount your unused steering wheels to the wall, boost your man cave appearance.
$35.00
Fanatec Clubsport Pedals V1-V2 & V3 Tilton Pedals by P3sc4

The Tilton Pads for Fanatec CSP V1-V3 based on the tilton type that are used in racing cars such as GTs. These pedals improve grip and pressure surface. The pedal pads are an adaptation of a design (created by Elaphe) for Fanatec csp v3 that this author (P3sc4) has converted and simplified for Logitech G25, G27, G29, G290 and Thrustmaster T3PA T3PA-PRO pedals.

THINGIVERSE LINK
Add a set of Tilton Pedals for your Fanatec Clubsport Pedals V2
$35.00
Fanatec Csr Pedal Inversion Brackets by Naiyon
The author has created brackets to invert fanatec csr pedals to save the cost of buying the brackets from the fanatec website. The author has a slight problem with the design. The author miscalculated the opening where part of the pedal assembly will slide into the brake pedal bracket by 4mm, and about 2 mm on the gas pedal.

If you want to file it down a little it can slide in for an even more secure fit, but works just as well if you leave it as is. This is more of a prototype might update this in the future when i get the chance too. Please instruct us if you want increased infill for "clutch kicking" - added strength.

Author quote "For infill should be around 50-70% if you like clutch kicking".

All pictures are taken from the Thingiverse website.
Invert your CSR pedals in this mod.
$45.00
Fanatec CSL Button Box wheel base plate by Chad711
CSL Button Box (PC only). Printed in black PLA

You will need a Pro Micro board and you will either need to create a sketch for the buttons to work or you can use the sketch from AmStudios Youtube videoThe parts and sketch are listed in the video information.

If you use his sketch please give him a like and sub as that sketch is all the hard work in this project. He has a lot of awesome DIY sim racing videos so check him out.

We can supply and build the electronics if you do not want to do yourself, please read the description on the Thingiverse website before ordering the print. The author has only allowed for the right side which has 11 button functions if you request 2 plate copy the same type and style buttons that will give you a total or 22 button functions out of a possible 32 button combinations provided by the AMSTUDIOS project.

Note:   Rotary encoders (for brake bias etc) take 3 switch functions (rotary left and right plus 1 x press button), hence 7 press button functions and 4 rotary positions. 

see other listings if you require the electronics to be added. Please be aware as these are not our files that you request to be printed we are not responsible for any alignment issues and the mounting bolts are not included with the printing.

If you require both sides of the wheel to have a button box please order two (2) in checkout. Please note you will have to pay for 2 postage charges as the parcel size is doubled.

All pictures are drawn from the Thingiverse web site.

THINGIVERSE LINK
Used to add button box functionality to your rig (electronics not included). Require 2 for either side of your wheel base.
$55.00
Fanatec CSL Button Box wheel base electronics addon
Addon for CSL Button Box (PC only). THINGIVERSE LINK

You will need a Pro Micro board and you will either need to create a sketch for the buttons to work or you can use the sketch from AmStudios Youtube videoThe parts and sketch are listed in the video information.

If you use his sketch please give him a like and sub as that sketch is all the hard work in this project. He has a lot of awesome DIY sim racing videos so check him out.

This addon adds the electronics portion of the CSL button box print mod on Thingiverse and includes the following Items

5 x individual momentary push button switches
1 x Arduino pro micro board.
2 x rotary encoders
2 x black knobs for the rotary encoders.
wiring and testing

Please allow 2-4 weeks after purchase and prior to posting as these are not a stock item yet and have to be ordered assembled and tested. 

Note:   Rotary encoders (for brake bias etc) take 3 switch functions (rotary left and right plus 1 x press button), hence 7 press button functions and 4 rotary positions. 

Pictures are taken from the thingiverse website. If you require 2 button boxes fully assembled see our other listings.
This mod provide the button box functionality by adding 5 push buttons and 2 rotary encoders to one 3D printed plate
$65.00
Fanatec CSL Button Box wheel base electronics left and right sides (full kit).
Full Kit for CSL Button Box (PC only). THINGIVERSE LINK

This item adds the electronics for 2 x button box for both sides of your CSL wheelbase. Original electronics project by AmStudios Youtube video. Please give him a like and sub as that sketch is all his  hard work in this project. 

This kit includes the electronics portion as well as the printing cost for both sides of the 2 CSL button box print mod on Thingiverse and includes the following Items

10 x individual momentary push button switches
1 x Arduino pro micro
link cable and connectors between each button box segment
4 x rotary encoders
4 x black knobs for the rotary encoders.
button box face plates are either painted matt black or covered in carbon fibre wrap. 
wiring and testing

Please note that mounting bolts are not included and actual fit is determined by the original print files supplied and not our responsibility it not exact fit is obtained.

Please allow 2-4 weeks after purchase and prior to posting as these are not a stock item yet and have to be ordered assembled and tested. 

Note:   Rotary encoders (for brake bias etc) take 3 switch functions (rotary left and right plus 1 x press button), hence 7 press button functions and 4 rotary positions.
This mod provides button box functionality to both sides of the CSL wheelbase (10 push buttons and 4 rotary encoders)
$250.00
Per Page      1 - 10 of 10
  • 1